When a system reports a ‘memory could not be written’ error, it typically indicates an issue with the system’s RAM or its controller (the hardware responsible for managing memory). To troubleshoot this error, you should follow the steps below:
1. Try booting into safe mode. Some errors occur due to corrupt drivers or malicious software residing on the system. Booting into safe mode will help identify if this is the case as any external software won’t be loaded.
2. Check the RAM. It is important to make sure that all of the RAM sticks are seated in their slots properly and that none of the pins have been bent or damaged. Also, ensure that the RAM is compatible with the motherboard.
3. Update your BIOS. If the issue persists, updating the BIOS may resolve the issue. Be sure to follow the instructions for updating the BIOS carefully, as BIOS updates can be difficult to reverse if something goes wrong.
4. Perform a RAM test. If the RAM seems to be alright, then a RAM test can help identify any underlying issues with the RAM itself. There are a number of third-party tools available that can help diagnose these issues.
5. Try different RAM slots. If the RAM test passes, then try moving the RAM sticks to different slots on the motherboard. This can help identify if there is a problem with the motherboard or its controllers.
6. Replace any faulty components. If the RAM continues to fail or if the motherboard or its controllers seem to be at fault, then these components should be replaced.
7. Reinstall Windows. If all else fails, then reinstalling Windows may be necessary as a last resort. Be sure to back up any important data before doing this.
Following these steps should help to identify and fix the source of a ‘memory could not be written’ error. If, however, the issue persists after completing these steps, then further investigation may be required and it may be necessary to consult with an IT professional.